Nowadays Updated Pass4sure 600-212 Study Guide
killexams.com offer correct and up as of yet 600-212 Questions and Answers with Authentic Implementing Cisco Service Provider Mobility LTE Networks test Questions and Answers for brand spanking new syllabus of Cisco 600-212 Exam. Practice our 600-212 PDF Braindumps and Answers to enhance your knowledge and pass your individual test with good Marks. Most people make sure your good results in the Test out Center, masking all of the information of 600-212 test and make your Knowledge on the 600-212 exam. Pass check out sure with the correct questions.

Sometime, pass the actual test is not important at all, however understanding the syllabus are required. This really is situation on 600-212 exam. We provide real exams questions and also answers of 600-212 test that will help you get hold of good ranking in the exam, but matter is not just driving the 600-212 test whilst. We provide VCE test simulator to Improve your knowledge about 600-212 syllabus to enable you to understand the major concepts of 600-212 objectives. This is necessary. It is not in any way easy. Conduct has completely ready 600-212 questions bank that can actually supply you wonderful understanding of topics, along with surety to pass the actual test in the beginning attempt. Under no circumstances under estimate the power of our 600-212 VCE test simulator. This will make it easier to lot understand and memorizing 600-212 questions with its Question BankVIRTUAL and VCE.

Features of Killexams 600-212 PDF Braindumps
-> Easy 600-212 PDF Braindumps get Admittance
-> Comprehensive 600-212 Questions and also Answers
-> 98% Success Pace of 600-212 Exam
-> Assured actual 600-212 test questions
-> 600-212 Questions Updated with Regular point of view.
-> Valid and 2021 Updated 600-212 test Dumps
-> 100% Transportable 600-212 test Files
-> Entire featured 600-212 VCE test Simulator
-> Limitless 600-212 test get Admittance
-> Great Discount Coupons
-> 100% Placed get Bill
-> 100% Secrecy Ensured
-> totally Success Promise
-> 100% 100 % free Study Guide meant for evaluation
-> Zero Hidden Expense
-> No Every month Charges
-> Zero Automatic Bill Renewal
-> 600-212 test Revise Intimation through Email
-> 100 % free Technical Support

Cheap Coupon with Full 600-212 PDF Braindumps Study Guide;
WC2020: 60% Ripped Discount to each exam
PROF17: 10% Even more Discount with Value Greater than $69
DEAL17: 15% Further Cheap on Benefits Greater than 99 dollars

Exam Name : Implementing Cisco Service Provider Mobility LTE Networks
Exam Number : 600-212 SPLTE
Exam Duration : 90 minutes
Questions in test : 65-75
Passing Score : Variable (750-850 / 1000 Approx.)
Recommended Training : Implementing Cisco Service Provider Mobility LTE Networks – (SPLTE)
Exam Registration : PEARSON VUE
Real Questions : Cisco 600-212 Real Questions
VCE Practice Test : Cisco Service Provider Mobility CDMA to LTE Specialist / Cisco Service Provider Mobility UMTS to LTE Specialist Practice Test

LTE 5%
1 Describe and differentiate LTE / SAE architecture
2 Explain attach procedure and call flow
MME (4G LTE) 16%
1 Network functions LTE –MME
a) Identify key functions of the MME and basic understanding of architecture and interfaces
b) Describe MME states of MM and CM management
c) Describe protocol stacks and procedures
d) Describe mobility management signaling and call flows
e) Describe session management signaling and call flows
f) Describe location management signaling and call flows
g0 Describe SGS procedures and signaling call flows
h) Describe intra-MME handovers procedure
i) Describe intra-RAT handovers procedure
j) Describe inter-MME handover procedures
2 QOS architecture
a) Describe the overall QOS functionality in LTE for single and multi pdn
b) Describe the QOS mapping from UMTS to LTE
3 Configurations
a) Configure S1 interface with corresponding services and system parameters
b) Configure S6a interface with corresponding services and system parameters
c) Configure S11 interface with corresponding services and system parameters
d) Configure S13 interface with corresponding services and system parameters
e) Identify and implement gateway selection mechanisms
f) Identify and implement MME operator policy and feature sets
g) Troubleshoot configurations
4 Network sharing
a) Describe MOCN architecture
b) Describe GWCN architecture
5 Security
a) Describe LTE security principles for MME network node
b) Explain security functions for mobility management procedures
6 Idle mode signaling reduction
a) Identify IDLE mode signaling reduction in an LTE network
b) Describe IDLE mode signaling establishment
c) Describe IDLE mode signaling reduction deactivation
7 CSFB
a) Describe CSFB architecture in LTE network
b) Describe CSFB call flow and signaling
8 IPv6 support
a) Configure IPV6 and dual stack EPS bearer scenarios
b) Configure and implement transport plane IPV6 support for MME
SGW (4G LTE) 10%
1 Network functions LTE-SGW
a) Identify key functions of the SGW and basic understanding of architecture and interfaces
b) Describe SGW attach procedures and call flows
c) Configure S1-U interface with corresponding services and system parameters
d) Configure S5/S8 using PMIP/GTP interface with corresponding services and system parameters
e) Configure S11 interface with corresponding services and system parameters
2 Feature functionality and extended application
a) Describe multi-PDN support for SGW
b) Describe downlink delay notification for SGW
c) Describe idle mode signaling reduction support for SGW
d) Configure and implement IPV6 support for SGW
3 Internetworking between LTE and other technologies
a) Describe interaction with CDMA/eHRPD internetworking
b) Describe interaction with GSM/UMTS internetworking
c) Configure S4 interface with corresponding services and system parameters
d) Configure S12 interface with corresponding services and system parameters
e) Configure S103 interface with corresponding services and system parameters
4 Charging
a) Configure Gx interface with corresponding services and system parameters
5 QoS
a) Describe QoS bearer management and marking for SGW
b) Configuring DSCP marking for SGW
PGW (4G LTE/EHRPD) 15%
1 Architecture overview
a) Identify key functions of the PGW and basic understanding of architecture and interfaces
2 Implement S5/S8 and Gn/Gp interface
a) Describe GTP protocol
b) Describe mobility management/session management call flows
c) Describe QoS in EPC
d) Configure S5/S8 interface with corresponding services and system parameters
e) Troubleshoot S5/S8 and Gn/Gp
3 APN
a) Describe the various IP address allocation mechanisms
b) Describe the concept of virtual APNs
c) Configure APNs and virtual APNs with corresponding service and system parameters
d) Configure IP source address validation and access control list
e) Troubleshoot APN
4 Implement Gx interface
a) Describe the important diameter AVPs needed for Gx
b) Describe basic Gx call flows
c) Configure Gx interface with corresponding services and system parameters
d) Troubleshoot Gx interface
e) Describe the common policy use cases
f) Configure failure handling modes
g) Configure usage monitoring over Gx
5 Implement Gy interface
a) Describe the important diameter AVPs needed for Gy
b) Describe the basic Gy call flows
c) Configure Gy interface with corresponding services and system parameters
d) Troubleshoot Gy interface
e) Configure failure handling modes
f) Describe OCS selection based on static configuration
g) Describe RADIUS attributes and PCRF out-of-quota redirection handling
6 Implement AAA Interface
a) Describe the basic AAA authentication and accounting call flows
b) Describe the important RADIUS attributes for authentication and accounting
c) Configure RADIUS interface with corresponding services and system parameters
d) Troubleshoot RADIUS interface
7 Implement S6b interface
a) Describe the important diameter AVPs needed for S6b
b) Describe the basic S6b call flows
c) Configure S6b interface with corresponding services and system parameters
d) Troubleshoot S6b interface
8 Interworking with non-3GPP access networks
a) Configure S2a interface with corresponding services and system parameters
b) Configure S2b interface with corresponding services and system parameters
c) Configure S2c interface with corresponding services and system parameters
d) Configure LMA functionality on a PGW
e) Configure non-3GPP IRAT handovers
f) Troubleshoot S2b and S2c interfaces
9 SGi Interface
a) Configure and implement various IP transport types
b) Configure and implement static and dynamic routing protocols
Voice Over LTE 20%
1 VoLTE application messages/protocols
a) Describe VoLTE specific diameter interface
b) Describe XCAP, LDAP, SPML
c) Describe CAMEL, CAP, INAP, SOAP, MSML
2 Voice over LTE architecture
a) Describe voice evolution in mobile network
b) Identify VoLTE system architecture and functions of network elements
3 Network elements in voice over LTE
a) Describe CSCF
b) Describe ENUM
c) Describe MNP — mobile number portability/database
d) Describe telephony application server
e) Describe DRA/DEA
f) Describe HSS
g) Describe PCRF
h) Describe ATCF,ATGW
i) Describe MRF
j) Describe understand OSS and BSS
4 QoS
a) Describe QoS in EPS
b) Describe end-to-end QoS in VoLTE
5 Interfaces and signaling messages
a) Configure Gx interface and signaling
b) Design Rx interface and signaling
c) Implement Cx interface and signaling
d) Describe ISC interface and signaling
e) Describe Ut interface
6 End-to-end call flow
a) Describe IMS client attach to EPC
b) Describe P-CSCF discovery
c) Describe IMS registration, re-registration and de-registration
d) Describe mobile-originated VoLTE call
e) Describe mobile-terminated VoLTE call
f) Describe emergency VoLTE call
7 Supplementary services
a) Describe IR.92 supplementary service overview
b) Describe IR.94 supplementary service overview
c) Describe Important services call flows
8 VoLTE Interworking
a) Describe PSTN interworking
b) Describe IMS/SIP interworking
c) Describe e-SRVCC
Other Interfaces 5%
1 AAA/diameter related interfaces
a) Describe SWx interface
b) Describe S9 interface
c) Describe Sp interface
2 HRPD related interfaces
a) Describe S101
b) Describe S103
Charging 13%
1 Offline charging service
a) Describe offline charging architecture
b) Explain the GTPP protocol header and messages
c) Explain charging data record transport through GTP'
d) Compare and contrast GTPP transfer scenarios
e) Describe and differentiate mobility records generated by MPC nodes
f) Identify and list conditions for record closure and generation
g) Explain Rf offline charging scenarios
h) Identify and list offline charging error cases
i) Configure for offline billing
j) Troubleshoot for offline billing
Lawful Intercept 5%
1 Describe lawful intercept architecture and events
2 Configure lawful interception
3 Describe lawful intercept trigger element
Management Protocols 11%
1 TACACS
a) Describe admin authentication and command authorization methods
b) Configure Local administration levels
c) Configure external authentication TACACS servers
2 Performance counters/statistics
a) Describe the various performance counters
b) Describe the collection and processing of performance counters
c) Describe the common KPIs for various MPC nodes
d) Configure counters and KPIs
3 Fault management
a) Describe SNMP protocols, alarms, notification and MIBs
b) Configure SNMP traps, filters and thresholds
4 syslog/events Log
a) Describe system log formats and filters
b) Configure syslog servers and event logs
5 Security
a) Describe user access control
6 NTP
a) Describe system timing
b) Configure NTP servers, system clock, time zone and timestamps